混凝土攪拌車系統結構的設置怎么達成作用?
1、攪拌筒:該車型所采用的攪拌筒形式是一種應用較為普遍的結構形式,攪拌筒采用梨形結構,其清洗用水和運輸過程中視需要補充加入的拌合水,均由攪拌筒頭部進料口處注入筒內。
1. Mixing drum: The mixing drum used in this model is a widely used structural form. The mixing drum adopts a pear shaped structure, and the cleaning water and mixing water added as needed during transportation are injected into the drum from the feeding port at the head of the mixing drum.
2、傳動系統:該攪拌筒的驅動方式為以發動機為動力源,由發動機后端的取力器取力,通過傳動軸傳遞到變量柱塞液壓泵,經定量柱塞油馬達,再通過減速機帶動攪拌筒轉動。
2. Transmission system: The driving mode of the mixing drum is based on the engine as the power source, and the power is taken from the power take-off at the rear of the engine. It is transmitted to the variable displacement plunger hydraulic pump through the transmission shaft, and then driven to rotate by a quantitative plunger oil motor and a reducer.
3、攪拌筒的進出料系統(裝料和卸料機構):是輔助攪拌筒工作的重要裝置。
3. The feeding and discharging system (loading and unloading mechanism) of the mixing drum is an important device that assists in the operation of the mixing drum.
4、操縱系統:是整個攪拌車的控制部件,操縱面板上開有“工字形”槽,是操縱桿的活動空間;并且后半部的槽上開有限位孔,用來固定操縱桿的位置。該操縱系統通過汽車尾部的左右兩個操縱桿來控制攪拌筒的正、反轉和轉速,從而來完成進出料以及攪拌動作。
4. Control system: It is the control component of the entire mixer truck, with a "I-shaped" groove on the control panel, which is the active space of the control rod; And a limited hole is opened on the slot in the rear half to fix the position of the joystick. The control system controls the forward, reverse, and rotational speed of the mixing drum through the left and right control levers at the rear of the car, thereby completing the feeding and mixing actions.
5、供水系統:混凝土攪拌車的供水系統主要用來清洗攪拌裝置。該車型的供水系統共有兩種型式,一種是離心水泵供水系統;一種是壓力水箱供水系統,可供用戶選裝。
5. Water supply system: the water supply system of Concrete mixer is mainly used to clean the mixing device. There are two types of water supply systems for this vehicle model, one is a centrifugal water pump water supply system; One type is a pressure water tank water supply system, which can be optionally installed by users.
混凝土攪拌車在運輸過程中會始終保持攪拌筒轉動,以保證所運載的混凝土不會凝固。運送完混凝土后, 通常都會用水沖洗攪拌筒內部, 防止硬化的混凝土占用空間, 使攪拌筒的容積越來越少。
The Concrete mixer will always keep the mixing drum rotating during transportation to ensure that the concrete carried will not solidify. After transporting concrete, it is usually necessary to flush the inside of the mixing drum with water to prevent hardened concrete from occupying space and reducing the volume of the mixing drum.
下一篇:混凝土攪拌車的混凝土凝固的快速方式!上一篇: